Please note that the procedure described below does not use rsh classes, as does the normal procedure described in "Adding a new host" and "Adding a new vault". The rsh procedure* is preferable, if possible, to the command-line procedure, since it is easier and faster.
The full procedure explained below can be used for adding new host or vault objects with the command-line procedure to a system spanning multiple file systems or to a Legion system with a common file system. For a system spanning multiple file systems, however, skip steps 2 and 3. In either case, the main Legion system must be active. Start it with the first-time start-up or restart procedure, if necessary.
legion_context_env legion_context_env.csh LegionClass.config LegionClass.config._LegionStorage_MetaData_
ksh or sh users:
. $LEGION/bin/legion_env . $LEGION_OPR/legion_context_env.sh
source $LEGION/bin/legion_env.csh source $LEGION_OPR/legion_context_env.csh
Once an extra host or vault has been safely shut down, it can be restarted. If the host or vault was not safely shut down, you cannot restart it, but must delete the OPR directory, restart Legion, and start the host or vault again (see System restart, in the System Administrator Manual).
* If preferred, ssh can be used in place of rsh
Directory of Legion 1.5 Manuals