This is a micron p5-120 with 32 MB edoram. I'd suggest more info in your
database (i.e. system, os, ram, compiler options). But it's still very
useful as is. Keep up the good work...
-------------------------------------------------------------
This system uses 8 bytes per DOUBLE PRECISION word.
-------------------------------------------------------------
Array size = 1000000, Offset = 0
Total memory required = 22.9 MB.
Each test is run 10 times, but only
the *best* time for each is used.
-------------------------------------------------------------
Your clock granularity/precision appears to be 8 microseconds.
Each test below will take on the order of 24074315 microseconds.
(= 3009289 clock ticks)
Increase the size of the arrays if this shows that
you are not getting at least 20 clock ticks per test.
-------------------------------------------------------------
WARNING: The above is only a rough guideline.
For best results, please be sure you know the
precision of your system timer.
-------------------------------------------------------------
Function Rate (MB/s) RMS time Min time Max time
Assignment: 79.3281 0.2020 0.2017 0.2040
Scaling : 100.4029 8.5205 0.1594 26.9401
Summing : 109.8624 0.2185 0.2185 0.2190
SAXPYing : 107.6987 0.2233 0.2228 0.2260
-- Bill Broadley Broadley@math.ucdavis.edu UCD Math Sys-Admin Linux is great. http://ucdmath.ucdavis.edu/~broadley PGP-ok
This archive was generated by hypermail 2b29 : Tue Apr 18 2000 - 05:23:05 CDT