hp_scanner
Differences
This shows you the differences between two versions of the page.
hp_scanner [2019/09/11 16:24] – created pa3gw | hp_scanner [2023/08/29 19:56] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | How to use this scanner | ||
+ | |||
+ | 1. This scanner has a pop - out keyboard under the screen. Just push in, and it will pop out. | ||
+ | 2. Press Sign in at the top of the screen. | ||
+ | 3. Log in using your CS Domain (CSDOM) account name only. For example: pa3gw | ||
+ | 4. Type in your CSDOM password. | ||
+ | 5. Press "Sign In" on the lower right. | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | Scanning to a network folder: | ||
+ | |||
+ | 1. Click "Scan to Network Folder" | ||
+ | 2. Click the “+” box and, on the right side of the screen, enter the desired network folder into which the scans will be placed. For example: \\samba\< | ||
+ | 3. Press the blue keyboard down button in the lower right hand corner to expose the save button. | ||
+ | 4. Then press the “Save” button in the LOWER RIGHT, not the save button on the left. | ||
+ | 5. You should then see the path on the left hand side, with a check mark next to it as pictured below. | ||
+ | |||
+ | 6. Click " | ||
+ | 7. Press “send” to start scanning to your network folder. | ||
+ | 8. To create a quick set, press “Retain” to keep all your settings from the scan intact. | ||
+ | 9. Under Quicksets and Defaults, press save, and save your quickset with a familiar name. I suggest saving them like pa3gw – single sided, pa3gw – double sided | ||
+ | |||
+ | Hint: Save the quickset with a meaningful name, because quicksets are seen by all users but only you have the persmissions to write scans to your home directory. | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
hp_scanner.txt · Last modified: 2023/08/29 19:56 by 127.0.0.1