Adding a network printer

Setting Up CS Network Printers on Mac Hosts

CS Mac hosts can print through either the Windows print server or the Linux (CUPS) print server.

1. Open System Preferences then select Printers & Scanners

2. Under the Printers list, click the '+' to open the add printers interface

3. If the Advanced button is not in the toolbar then right click the toolbar, click the Customize Toolbar option, then drag the Advanced button onto the toolbar.

To use the Windows print server use the following two steps:

4. Click the Advanced button, for Type select 'Windows' or 'Windows printer via spoolss', for Device select Another Device

5. In the URL field enter "smb://kore.cs.virginia.edu/" and the name of the printer you are installing (see table below)

Continue to step 6 below

To use the Linux CUPS print server use the following steps:

4. Click the Advanced button, for Type select 'Internet Printing Protocol', for Device select Another Device

5. In the URL field enter "ipp://cups.cs.virginia.edu:631/printers/" and the name of the printer you are installing, i.e. "ipp://cups.cs.virginia.edu:631/printers/CS-BW1" (see table below)

continuing with step 6

6. Change the name field to name the printer you are installing in an identifiable way (e.g. 'CS-BW1', 'CS-BW1 via CUPS' or 'CS-BW1 from kore')

7. Under 'Print Using' select 'Select a driver to use' - you will likely need to download the driver software for your machine from the manufacturer if it is not already loaded.

Note on HP driver acquisition: Support for older HP printers under newer versions of OS X (10.9 and above) is not well documented by HP. However, as of 11/29/2016, Apple has a collection of HP drivers at https://support.apple.com/kb/DL1888 (574MB, dated August 30, 2016) that installs support for a large number of devices, including our older HP printers. It is also possible to use the built-in generic PostScript driver but not all of the installed options will be available.

8. Select the appropriate driver for the model printer you are installing (see table below for the most common model information)

9. Click the Add button and, when the Installable Options dialog opens up, select the appropriate ones (refer again to the table below) and click Continue

10. A dialog will open the first time you print. Enter your user name, in the format 'csdom\mst3k', and password. If desired click the 'Remember this password in my keychain' option (using the keychain option will prevent having to enter the username and password for each print job.)

		Windows Printers Table

	Windows		CUPS		Model				Location	Installable options available
	name		name 

	CS-BW1		same		HP LaserJet 9050dn		Rice 525	Tray 1, Tray 4, Duplex Unit 

	CS-BW2 		same		HP LaserJet 9050dn		Rice 429	Tray 1, Tray 4, Duplex Unit

	CS-COLOR1 	color-laser1	HP Color Laserjet CP5220 Series	Rice 525	Duplex Unit

	CS-COLOR2 	color-laser2	HP Color Laserjet CP5220 Series	Rice 429	Duplex Unit

	CS-Copier7502	same		Ricoh Aficio MP 7502		Rice 525	Large Capacity tray, Finisher:
	 										SR4080,	Multi-hole Punch Unit