CS6456 - HW3

HW3: Multi-Medium Filesystem

The computing memory hierarchy continues to evolve with new very-fast non-volatile memories (NVM) supplementing solid-state drives and spinning hard drives for data storage in computers. OS researchers are designing new filesystems (like NOVA and Strata) to take advantage of the new storage options, and in this assignment, you will too.

Your task is to design an implement a simple filesystem that supports a relatively small, but fast and byte-addressable NVM and a slow, but much larger, block-addressable hard disk. Your filesystem will provide a single interface for user applications, because remember the operating system is supposed to hide the hardware details from the user.

After creating the filesystem, you will test its performance with a few tests to see the effects of your design as well as the different storage technologies.

Download the project files: hw3_2019-10-09.zip.

Interfaces

Your filesystem will be a userspace library on top of two simulated storage mediums. Code that uses the filesystem will call the functions you provide. To actually “write” to and “read” from the storage medium you will call the functions provided by the simulated storage.

Application Interface

Your filesystem will provide the following interface:

  • int uva_open(char* filename, bool writeable): Opens the file with the given filename in the correct mode (either readable or writable). If writable is true, then the file may only be written to. If writeable is false, then the file can only be read from. Returns a positive identifier for the opened file if the file was opened successfully. If the file cannot be opened an error is indicated by returning <= 0.

  • int uva_close(int file_identifier): Close the provided file. Returns 0 on success, and -1 if the file couldn’t be closed.

  • int uva_read(int file_identifier, char* buffer, int offset, int length): Read up to length bytes from the file starting offset bytes from the end of the previous read into buffer. Offset must not be less than zero. If the file has not been read from before then the offset is from the beginning of the file. Returns the number of bytes read from the file, or -1 if there is an error.

  • int uva_read_reset(int file_identifier): Reset the read position back to the beginning of the file.

  • int uva_write(int file_identifier, char* buffer, int length): Write length bytes from buffer to the end of the file. Returns 0 if the write is successful and -1 if there is an error.

Storage Interface

Your filesystem will use the following interface:

  • int disk_write(int block_number, char* buffer): Write the contents of buffer to the block specified by block_number to disk. All blocks are 512 bytes (therefore buffer should point to 512 bytes of memory). Returns 0 on success and -1 if the block_number is invalid.

  • int disk_read(int block_number, char* buffer): Read the contents of block block_number into the provided buffer. Returns 0 on success and -1 if the block_number is invalid.

  • int disk_block_count(): Returns the number of blocks in the disk.

  • int nvm_write(int byte_number, int length, char* buffer): Write length bytes of buffer to the NVM starting at byte number byte_number. Returns 0 on success and -1 if the NVM is not large enough to store the entire write.

  • int nvm_read(int byte_number, int length, char* buffer): Read length bytes starting at byte_number from the NVM and copy them into buffer. Returns 0 on success and -1 if the NVM is not large enough to complete the entire read.

  • int nvm_byte_count(): Returns the number of bytes available in the NVM.

Requirements

The design of the filesystem is up to you, but it must support the following operations:

  • Reading and writing files (of course!). Once opened, a file can only be read from or written to based on the flag passed to uva_open(). If a user attempts to read from a file opened only for writing, for example, an error should be returned.

  • The filesystem must be able to store more data than can fit in just the disk or nonvolatile memory.

  • The filesystem must support filenames at least 127 bytes long.

Implementation

You may implement the filesystem in C or Python. You can really use any language, but you are then responsible for setting up the tests. Note: if you use Python, the underlying storage will still be in a shared library from C. To create buffers to pass to the disk and nvm, use ctypes.create_string_buffer().

Testing

Towards the bottom of test.py you should choose the version (C or Python) you have implemented. Then you can call the run_test() function with a test name.

Running the test script looks something like:

$ make             # generate the shared library from C
$ python3 test.py  # run the tests

Since filesystems are persistent, the files from previous tests will be preserved unless the raw storage files are deleted.

Since the underlying storage is always implemented in C, you need to run make at least once when implementing the filesystem in Python.

Debugging

The two filesystems are stored as just regular binary files. Therefore, you can view their contents like so:

$ hexdump -C disk.bin | less
$ hexdump -C nvm.bin | less

Deliverables

  1. The implementation of your filesystem.

  2. A figure showing the performance of your filesystem when creating small files. The x-axis should be the number of files. The y-axis should be time. You should time how long it takes your filesystem to create X number of 256 B files, where X ranges from 0 to 500 skipping by 10. The filesystem should be erased between each test.

  3. A figure showing the performance of your filesystem when creating files of different sizes. The x-axis should be filesize. The y-axis should be time. You should time how long it takes your filesystem to write a single file of size X, where X ranges from 0 bytes to 30000 bytes, skipping by 1000 bytes. The filesystem should be erased between each test.

  4. A figure showing the performance of your filesystem that demonstrates the read performance. You should design a reasonable experiment and plot the results. Clearly label the axis.

Submission

Submit the code and figures in a .zip file on Collab.