Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hp_scanner [2019/09/11 16:24] (current)
pa3gw created
Line 1: Line 1:
 +How to use this scanner
 +
 +    1. This scanner has a pop - out keyboard under the screen. Just push in, and it will pop out.
 +    2. Press Sign in at the top of the screen.
 +    3. Log in using your CS Domain (CSDOM) account name only. For example: pa3gw
 +    4. Type in your CSDOM password.
 +    5. Press "Sign In" on the lower right.
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +Scanning to a network folder:
 +
 +    1. Click "Scan to Network Folder"​.
 +    2. Click the “+” box and, on the right side of the screen, enter the desired network folder into which the scans will be placed. For example: \\samba\<​username>​\scans scans to your home directory, into a folder called "​scans"​. If the folder does not exist it will be created.
 +    3. Press the blue keyboard down button in the lower right hand corner to expose the save button.
 +    4. Then press the “Save” button in the LOWER RIGHT, not the save button on the left.
 +    5. You should then see the path on the left hand side, with a check mark next to it as pictured below.
 +
 +    6. Click "​Options"​ to set common options. By default, the scans are double sided.
 +    7. Press “send” to start scanning to your network folder.
 +    8. To create a quick set, press “Retain” to keep all your settings from the scan intact.
 +    9. Under Quicksets and Defaults, press save, and save your quickset with a familiar name. I suggest saving them like pa3gw – single sided, pa3gw – double sided 
 +
 +Hint: Save the quickset with a meaningful name, because quicksets are seen by all users but only you have   the persmissions to write scans to your home directory.
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
  • hp_scanner.txt
  • Last modified: 2019/09/11 16:24
  • by pa3gw