Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
xerox_versalink_b610 [2019/06/24 13:18]
pa3gw [Linux:]
xerox_versalink_b610 [2019/07/17 18:31] (current)
pa3gw [Mac:]
Line 30: Line 30:
     3. Click the Apple logo → System Preferences → Printers and Scanners     3. Click the Apple logo → System Preferences → Printers and Scanners
     4. Click the + Button ​     4. Click the + Button ​
-    5. Click the advanced Cog +    5. Click the advanced Cog (if you do not see the advanced cog follow steps below) 
 +      * Hold the control button and left click the grey area next to the Windows icon. 
 +      * You should see a menu, and at the bottom it should say "​Customize Toolbar..."​  
 +      * Click customize toolbar  
 +      * You should now see a Cog with the word advanced under it, drag this onto the toolbar. 
 +      * Press DONE and now you should have access to the following options.
     6. Click the Type drop down menu and select “Windows printer via spoolss”     6. Click the Type drop down menu and select “Windows printer via spoolss”
     7. type in the url: smb://​printserver.cs.virginia.edu/​printer025     7. type in the url: smb://​printserver.cs.virginia.edu/​printer025
Line 36: Line 41:
     9. For Driver pick select software, then search for “Xerox VersaLink B610”     9. For Driver pick select software, then search for “Xerox VersaLink B610”
     10. Select the configure option and make sure the finisher is installed.     10. Select the configure option and make sure the finisher is installed.
 +    ​
 +    When printing it will ask for a user name and password. This is you CS Domain account, enter it in the format:
 +    CSDOM\pa3gw ​
 +    ​
 +    Remember to use your CS Domain account password!
  
 ======Linux:​====== ======Linux:​======
     1. Open the printer configuration utility and select Add Printer.     1. Open the printer configuration utility and select Add Printer.
     2. Select Manual URI and enter: lpd://​printserver.cs.virginia.edu/​printer025     2. Select Manual URI and enter: lpd://​printserver.cs.virginia.edu/​printer025
-    3. Select “Manually Provide a PPD file” and use the PPD file here: {{ :​wiki:​xeroxppd.tar |}}. Be sure to unzip the file with tar!+    3. Select “Manually Provide a PPD file” and use the PPD file linked below
     4. Name the printer and be sure to uncheck “share this printer.”     4. Name the printer and be sure to uncheck “share this printer.”
  
 +{{ :​wiki:​xeroxppd.tar |}}
  
  • xerox_versalink_b610.1561382314.txt.gz
  • Last modified: 2019/06/24 13:18
  • by pa3gw